Gunsmithing Roll Pin Punch Set – Precision Starter Tools
$13.95
Precision Building Essentials: This 4-piece starter punch set is an essential toolkit for AR builders and gunsmiths, featuring sizes 1/16″, 5/64″, 3/32″, and 1/8″. Crafted from heat-treated steel with a sleek black finish, these punches are specifically designed to securely hold roll pins in place during the initial stages of installation. This specialized design prevents accidental slipping and protects your firearm’s finish, ensuring a professional, mar-free assembly every time.
Professional-Grade Precision for Firearm Maintenance and Assembly
Take the frustration out of firearm assembly with this high-performance Roll Pin Starter Punch Set. Whether you are performing a first-time AR build or conducting routine maintenance on specialized equipment, these punches provide the stability and control required for delicate pin alignment. Unlike standard punches, these “starter” tools feature a hollow-end design that cradles the pin, allowing you to seat it perfectly without the risk of the tool slipping off and damaging the receiver or frame.
Why This Starter Set Is Critical for Your Workbench:
-
Specialized Starter Design: Each punch is engineered to hold the roll pin securely within the tool head. This allows you to “start” the pin with a hammer tap using one hand, keeping the other hand free to steady the firearm. This eliminates the common issue of pins buckling or flying across the room during installation.
-
Hardened Steel Construction: Manufactured from high-quality, heat-treated steel, these tools are built to withstand repeated impact without deforming. The black oxide finish provides superior corrosion resistance and a non-glare surface for high-visibility work in well-lit shops.
-
Comprehensive 4-Piece Versatility: This set includes the most common sizes utilized in modern firearm platforms: 1/16″, 5/64″, 3/32″, and 1/8″. This range ensures you have the correct fit for gas block pins, trigger guards, bolt catches, and various small detent pins.
-
Ergonomic Knurled Grip: Each punch features a textured, knurled handle surface. This ergonomic detail provides a high-friction grip, ensuring the tool stays firmly in your hand even if working with cleaning oils or lubricants.
-
Professional Results for Enthusiasts: Designed to meet the standards of professional armorers while remaining accessible for hobbyists, this set helps prevent the “idiot marks” and scratches often caused by using improper tools like pliers or flat-head punches.
Technical Specifications:
-
Material: Heat-Treated Alloy Steel
-
Finish: Industrial Black Oxide
-
Sizes Included: 1/16, 5/64, 3/32, 1/8
-
Application: Pin starting and alignment for AR-platforms, handguns, and machinery.
| Manufacturer |
GOTICAL |
|---|---|
| Part Number |
123412QWE |
| Item Weight |
2.39 ounces |
| Package Dimensions |
3.82 x 1.26 x 0.31 inches |
| Is Discontinued By Manufacturer |
No |
| Color |
Pack of 1 |
| Batteries Included? |
No |
| Batteries Required? |
No |
| Best Sellers Rank |
#35 , 305 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #32 in Pin Punches |
| Date First Available |
February 23 , 2019 |
60 reviews for Gunsmithing Roll Pin Punch Set – Precision Starter Tools
Clear filtersRelated products
1901 Thornridge Cir. Shiloh, Hawaii 81063
xtemos.studio@gmail.com
Rated 4.9
Based on 374 reviews
Account / Resources
Shopgotical specializes in water and air filtration solutions, offering efficient products like water filters and air purifiers.
Legal Business Entity: Signature Stitch Private Limited (India)
Customer Support
- Compay Name: Dollar Hub LLC
- Tel: +13862401708 （Support SMS）
- Email: service@shopgotical.com
- Address: Warehouse address: 6129 maben woods lane
- We are available Monday to Sunday, 9:00 AM – 5:00 PM (EST)
About Us
- Compay Name: Dollar Hub LLC
- Tel: +13862401708 （Support SMS）
- Email: service@shopgotical.com
- Address: Warehouse address: 6129 maben woods lane
- We are available Monday to Sunday, 9:00 AM – 5:00 PM (EST)
Be the first to know about new products and exclusive offers.
© 2024, Shopgotical.com. Powered by HA Software Thrill
William mueller –
5.0 out of 5 stars
Great quality
Very nice set
One person found this helpful
Anonymous710 –
5.0 out of 5 stars
PERFECT!!!
Don’t even attempt the job without this tool. Took me 30 seconds. Thank you for saving me a lot of headache!
TJ –
5.0 out of 5 stars
Great value
great value and fast shipping
Martin –
5.0 out of 5 stars
Surprisingly good
Very pleased. Used to install a roll pin in an AR build. Worked great! Much more affordable than other sets I considered.
Shannon Dennis Muldrow –
5.0 out of 5 stars
Does the job
I can’t really say much about it is for one thing really starting Rollpins and it does the job
Chuck Mueller –
5.0 out of 5 stars
Nice tool
Makes installation of roll pins much easier
BARRY BOLIN –
5.0 out of 5 stars
great for AR builds
Great tool
americanorway –
5.0 out of 5 stars
Very nice
I find only 2 of them are big enough for roll pins on a gun but with that they are sturdy and save alot of time and headache
THOMAS W PIERCE –
3.0 out of 5 stars
Extremely short punch set
The description tells the diameter but not the overall length of the punches individually. After they arrived, I went back to see the description, and that’s when I saw the “Overal Package” length was only 3.82 inches. Going to be a giveaway gift now. Already replaced with the Wheeler 710906 Engineering Bolt Catch Install Tool Kit for about $12. My hands are much happier now. ☺
2 people found this helpful
Mark Abel –
4.0 out of 5 stars
Great buy
Use for assembly and disassembly of firearms, works well
Baba Sain –
5.0 out of 5 stars
Great
I really like it
Tommy G. –
5.0 out of 5 stars
I don’t know
Pistol repair
2 people found this helpful
SBSB –
2.0 out of 5 stars
Rusty
They were covered in rust like they’ve been sitting on a shelf forever before being shipped. Definitely not brand new-which is what I thought I was purchasing.
One person found this helpful
Amazon Customer –
2.0 out of 5 stars
not what it is suppose to be
it was not what was advertised. 3 of one size and 1 of another size
PremingPreming –
1.0 out of 5 stars
Inaccurate description. Look elsewhere
What actually ships is one large tool and 3 medium tools (see photo). I’m missing two smaller tools and was unable to use this to put my rifle together. I suggest that you look for a different roll pin tool set.
2 people found this helpful
Sharon M Hast –
1.0 out of 5 stars
VERY POOR QUALITY! DO NOT WASTE YOUR MONEY!
It was like hammering with a piece of chalk! Every time I hit the tool it would crumble! DO NOT WASTE YOUR MONEY!VERY POOR QUALITY!
Paul rolens –
1.0 out of 5 stars
Got three of one size
Didn’t have all the sizes in description one large and three of next size down .
One person found this helpful
POOPER –
1.0 out of 5 stars
Junk
These roll pin starters are completely the wrong size I will get your rope in stuck inside waste of money
C C T –
1.0 out of 5 stars
What actually ships is one large tool and 3 medium tools
What actually ships is one large tool and 3 medium tools
Dale Mitchell –
1.0 out of 5 stars
I ordered the pack of “2” and only received the single
I ordered the pack of “2” and only received the
Marc S. –
2.0 out of 5 stars
They’re OK, but the ends are hollow wishing they were solid
They are OK, but the ends are hollow not solid
One person found this helpful
samuel r. –
5.0 out of 5 stars
Just what I needed.
Just as described. Will get the job done.
gzoerner –
5.0 out of 5 stars
Gunsmithing must-have
Durable
A. E. Gervais Jr. –
1.0 out of 5 stars
ALL SAME SIZE…THE WRONG S IZE
Quality control is non-existent. Tool size and hammer are useless.
Frank –
2.0 out of 5 stars
soft metal
these punches work for the home gun builder but not a professional. after a few uses the roll pin punch started to spread apart. i was able to get 40 roll pins in and it starts to get sloppy.
2 people found this helpful
Guitar NerdGuitar Nerd –
2.0 out of 5 stars
Not 4 Sizes!
Received 3 of one size punch, and 1 of another. Was supposed to be 1 each of 4 different sizes. Quality seems to be fine for their purpose. Tried to return them, and Amazon issued an immediate refund (not verified).
One person found this helpful
Rick B. –
5.0 out of 5 stars
Gunsmith tools
As described
Amazon Customer –
5.0 out of 5 stars
Just what I needed
They are easy to use and did a great job
christopher j. –
5.0 out of 5 stars
Work well
We could set a little punches that worked very well on my AR
Saykos –
1.0 out of 5 stars
Sizes not accurate.
The received punches that arrived were not the described sizes . Not a big deal I can return them but I couldn’t complete my projects.
Amazon Customer –
5.0 out of 5 stars
Worked great.
This set worked well. Hard to start roll pins without them.
danny jones –
5.0 out of 5 stars
They worked great
No dislike at all
Thomas –
5.0 out of 5 stars
Very Good Quality
Work great. Good quality.
Chris Moran –
5.0 out of 5 stars
Well made
Used them the day they arrived, worked great , sturdy and well made
TrikCobra –
5.0 out of 5 stars
Great product. Great price!
I have used these several times already. They are good quality and do exactly what they are meant to do.
David R. Cobb –
1.0 out of 5 stars
Don’t buy these. Buy something better
Like some of the other posts I received 3 of the same diameter punches. There are no sizes stamped on the punches and the actual two sizes I got were not the right diameter. I bought these to rebuild a firearm, but couldn’t use them at all. At least I had an older set that worked fine that got the job done. So, speed a little more money and get something that works.
Jason samples –
5.0 out of 5 stars
They are worth buying
They start roll pins with ease. Made my job easier.
Mr. Caliman –
5.0 out of 5 stars
Perfect
Perfect for my 5.56 builds! (Gas block, forward assist, bolt catch)
Amazon Customer –
5.0 out of 5 stars
Great product at a fair price.
Great product at a fair price.
Dennis A Edwards –
5.0 out of 5 stars
Work great
Sized right for gun repair
Riley –
5.0 out of 5 stars
Great tool
Very nice set for the new rifleman or expert gunsmith. High quality and expect to last a lifetime.
One person found this helpful
Mark beleski –
5.0 out of 5 stars
Pin starter set
Works great I used them today no problems thanks
One person found this helpful
Richard –
5.0 out of 5 stars
Works!
They’re quality.
Gary0529 –
4.0 out of 5 stars
Seems fine for a hobbyist
I needed a roll pin set and this one seems fine for the cost–I am hot a full time machinist or gunsmith so I think it will do fine
One person found this helpful
Eric Red Howie –
5.0 out of 5 stars
Worked very well
These little guys were pretty much all I needed that I didn’t already have and they worked like a charm.
One person found this helpful
Traveler4ever –
5.0 out of 5 stars
Great Value, Gets the Job Done
This product does exactly what its intended to do, holds a roller pin so the insert process can be started. They work fine for installing trigger guard pins and I also use them in the initial phase to insert the pin on the bolt release on my firearm. Yes, they are a bit short but that’s where my longer set of roll pin punches take over. I’ve only used these pin starters a few times and they help me perform a professional looking job. If you don’t have the right tools the work you perform will show it. I would recommend this set of roll pin starters to a friend.
5 people found this helpful
Amazon Customer –
5.0 out of 5 stars
Good
Good punches for the money
One person found this helpful
Amazon Customer –
5.0 out of 5 stars
solid preformers
The rear sight roll pin holder was a tad thick to fit, it took effort to grind down. Lots of of high carbon sparks, not pot metal.
One person found this helpful
David L. Long –
4.0 out of 5 stars
Handy
Handy
J. Caffarella –
4.0 out of 5 stars
Starter punches
For clarification, these are starter punches for roll pins. The sizes 1/16, 1/8, etc., refer to the size of the roll pin, which seats inside the hollowed end of the punch, allowing you to start to drive the roll pin into its hole. You will need another set of punches the actual diameter of the roll pin to drive the roll pin all the way in. The diameter of the thinnest punch with a 1/16-inch hollowed end, for starting a 1/16-inch roll pin, is about 1/8-inch. The pins are short, but are only designed to be starters. The quality seems good, but if you use these for anything other than starting, you’ll mushroom the end of the punch, at which point it may no longer be useful as a starter.
6 people found this helpful